AquaMax Pressure Washers
The AquaMax is an extra heavy-duty, no-nonsense machine built primarily for the hire industry and must not be confused with lower level imported equipment available on the market. Built onto a 2mm heavy gauge powder coated Zintec Steel chassis with twin axles and 10” wheels for durability and stability, AquaMax features a large capacity water tank with type AA air gap and a WRAS approved hi-flow ball valve to BS 1212. The whole machine is wrapped with a polished 304 grade stainless steel cover.
Motor
All AquaMax units feature a direct drive four-pole electric motor running at 1400 – 1450 RPM, incorporating squirrel cage rotor construction and bi-directional cooling fan providing maximum efficiency.
boiler
The boiler comprises of a full stainless steel jacket, stainless steel upper and lower head assemblies and a stainless steel lower flame break ring. Heat diffusion is maximized by a retained fire cement bottom and deflected around a double wound seamless 3 mm section coil assembly making this unit compact but highly efficient. The fuel system features heavy duty 4 stage filtration as standard.
pump
All AquaMax machines are fitted with top quality industrial pumps featuring a 3-piston ceramic plunger system, long life hardened crankshaft and oil immersed bearing profile. All the wetted parts are constructed of brass or stainless steel ensuring maximum anti corrosion properties. The whole range is equipped with the unique F.S.A. System. This comprises of a special flow sensitive regulator, which ensures pressure does not remain trapped in the high-pressure line during bypass operation or shut down mode. Low voltage controls (24v) have been fitted as standard to achieve maximum operator safety, complemented by a fully automated, timed total shut down system with mains interruption release and thermal overload protection for motor and boiler, low-level fuel cut off is standard on all AquaMax models.
AquaForce Pressure Washers
The AquaForce is an extra heavy-duty, no-nonsense machine built to operate in extreme conditions and must not be confused with lower level equipment. Offering easy access to parts for servicing and maintenance, without compromising the striking appearance. Manufactured completely from heavy gauge 304 stainless steel with a large capacity (32 Litres) integral water tank featuring a type AA air gap and a WRAS approved hi-flow ball valve to BS 1212 .
Motor
All AquaForce units feature a direct drive four-pole electric motor running at 1400 – 1450 RPM, incorporating squirrel cage rotor construction and bi-directional cooling fan providing maximum efficiency.
boiler
The boiler comprises of a full stainless steel jacket, stainless steel upper and lower head assemblies and a stainless steel lower flame break ring. Heat diffusion is maximised by a retained fire cement bottom and deflected around a double wound seamless 3 mm section coil assembly making this unit compact but highly efficient. Fuel system features 4 stage filtration.
pump
All AquaForce machines are fitted with top quality industrial pumps featuring a 3-piston ceramic plunger system, long life hardened crankshaft and oil immersed bearing profile. All the wetted parts are constructed of brass or stainless steel ensuring maximum anti corrosion properties. The whole range is equipped with the unique F.S.A. System. This comprises of a special flow sensitive regulator, which ensures pressure does not remain trapped in the high-pressure line during bypass operation or shut down mode. Low voltage controls (24v) have been fitted as standard to achieve maximum operator safety, complemented by a fully automated, timed total shut down system with mains interruption release and thermal overload protection for motor and boiler, low-level fuel cut off is standard on all AquaForce models.
Pulse Pressure Washers
The Pulse range is packed with features normally associated with high-end pressure washers, offering extremely good value for money. Built onto a heavy gauge thermoplastic chassis with 10” high impact rubber wheels and twin castors (one locking) for durability and stability, Pulse features a WRAS approved ball valve and water tank system. With a removable top and rear cover for service access, a storage area for service spares, an integral chemical tank and a 22 litre fuel tank with low fuel cut out. Visual indication for power connection pump on, burner on and low fuel state.
Motor
All Pulse units feature a direct drive four-pole electric motor running at 1400 – 1450 RPM, incorporating squirrel cage rotor construction and a bi-directional cooling fan providing maximum efficiency.
boiler
The boiler comprises of a heavy gauge stainless steel jacket, featuring stainless steel upper and lower head assemblies and a stainless steel lower flame break ring and pan. Heat diffusion is maximised by special retained fire resistant pads and deflected around a double wound seamless coil assembly, making this unit compact but highly efficient. The fuel system features 3 stage filtration.
pump
All Pulse machines are fitted with top quality industrial pumps featuring a 3-piston ceramic plunger system; long life hardened crankshafts and oil immersed bearing profile. All the wetted parts are constructed of brass or stainless steel ensuring maximum anti corrosion properties. The whole range is equipped with the unique F.S.A. System. This comprises of a special flow sensitive automatic Regulator, which ensures no pressure remains trapped in the high-pressure line during bypass operation or shut down mode. Low voltage controls (24v) have been fitted as standard to achieve maximum operator safety, complemented by a fully automated, timed total shut down system, and thermal overload protection for motor and boiler, low-level fuel cut off is standard on all Pulse models.
Zeta Pressure Washers
The Zeta is the smallest of our how water machines but still maintains a heavy duty presence. The solid tubular frame ensures the machine will withstand the constant mobile use without the usual problems associated with light commercial machines.
This machine is ideal for the hobby, DIY also the commercial market where occasional use of an hour a day and hot water is required.
The pressure, flow, chemical and temperature are fully adjustable making this machine very versatile but still able to “pack a punch” when the need is required, the small dimensions make it very easy to maneuver and carry in an estate car, pickup truck or small van.
key features
* Pump with 3 ceramic pistons
* Regulating valve with built-in bypass
* Strong frame in sheet metal painted with epoxy powders
* High efficiency boiler, with quality steel coil, integrated burner
* Burner control flow switch
* Electric control box with IP55 protection
* Electric motor with built-in thermal relay, forced cooling with double
* Acting conveyer in aluminium
* Energy efficiency (high efficiency boiler and low electricity consumption)
* Safety and protection of the environment (very low emissions of unburned substances and low operating noise level)
* Versatile use for temperature up to 90°, pressure, flow rate and low pressure detergent use
* Easy maintenance for any component
